L3 MAPPS to Update Ling Ao Phase II Full Scope Simulator With Orchid® and Enhanced Severe Accident Simulation
MONTREAL, February 16, 2017 – L3 MAPPS announced today that it has been awarded a contract from Ling Ao Nuclear Power Co., Ltd. (LANPC), a division of China General Nuclear (CGN), to upgrade the Ling Ao Phase II full scope simulator with L3’s latest Orchid® simulation software. Under this contract, the company will also enable the simulator with a severe accident simulation model that will automatically switch from the standard L3 MAPPS plant models to Electric Power Research Institute’s (EPRI) Modular Accident Analysis Program (MAAP5*). The updated simulation environment and “autoswitch” program are due to be in service in the first quarter of 2018.
“L3 MAPPS made new investments last year to enhance autoswitching to the severe accident simulation model, and we are delighted that CGN will be the first to take advantage of our latest research and development efforts,” said Michael Chatlani, Vice President of Marketing & Sales for L3 MAPPS Power Systems and Simulation.
“We worked closely with L3 MAPPS to deploy China’s first severe nuclear accident simulation on the Ling Ao Phase II full scope simulator in 2013 to enhance training scenarios that simulate degraded reactor core conditions,” said Ma Deyou, Senior Chief Engineer, Training Center, Daya Bay Nuclear Power Operations and Management Co., Ltd. (DNMC). “This new project is the next step in enhancing the unique capability that we already have.”
The current simulation environment, based on the Visual Simex™ simulator executive and ROSE® plant models, will be migrated to Orchid Simulator Executive and Orchid Modeling Environment, respectively. Also, the previously delivered MAAP 5.01 models will be replaced with MAAP 5.04 to enable autoswitching during periods of elevated fuel temperatures. With MAAP5, the updated Ling Ao Phase II simulator will be used for training scenarios relating to degraded reactor core conditions that result in fuel melting, including cladding oxidation and hydrogen generation, vessel failure, containment failure and fission product release. MAAP5-DOSE will be used to calculate simulated off-site dose rates.
MAAP5 is a software program that performs severe accident analysis for nuclear power plants, including assessments of core damage and radiological transport. The simulator is already equipped with 2-D and 3-D animated, interactive visualizations of the reactor vessel, containment building and spent fuel pool to provide operators with additional insight into the behavior of the plant during severe accidents.
CGN’s Ling Ao Phase II nuclear plant comprises the first two CPR1000 nuclear generating units that were put into commercial operation – the first unit in September 2010 and the second in August 2011. The CPR1000 is a Chinese standard design featuring a 1,080 MWe three-loop pressurized water reactor (PWR). The Ling Ao Phase II full scope simulator, built by L3 MAPPS in cooperation with AREVA and Siemens, was put into service in August 2009.
L3 MAPPS has over 30 years of experience in pioneering technological advances in the marine automation field and over 40 years of experience in delivering high-fidelity power plant simulation to leading utilities worldwide. In addition, the company has more than four decades of expertise in supplying plant computer systems for Canadian heavy water reactors. L3 MAPPS also provides targeted controls and simulation solutions to the space sector. To learn more about L3 MAPPS, please visit the company’s website at www.L3T.com/MAPPS.
Headquartered in New York City, L3 Technologies employs approximately 38,000 people worldwide and is a leading provider of a broad range of communication and electronic systems and products used on military, homeland security and commercial platforms. L3 is also a prime contractor in aerospace systems, security and detection systems, and pilot training. The company reported 2016 sales of $10.5 billion. To learn more about L3, please visit the company’s website at www.L3T.com.
Safe Harbor Statement Under the Private Securities Litigation Reform Act of 1995
Except for historical information contained herein, the matters set forth in this news release are forward-looking statements. Statements that are predictive in nature, that depend upon or refer to events or conditions or that include words such as "expects," "anticipates," "intends," "plans," "believes," "estimates," "will," "could" and similar expressions are forward-looking statements. The forward-looking statements set forth above involve a number of risks and uncertainties that could cause actual results to differ materially from any such statement, including the risks and uncertainties discussed in the company's Safe Harbor Compliance Statement for Forward-Looking Statements included in the company's recent filings, including Forms 10-K and 10-Q, with the Securities and Exchange Commission. The forward-looking statements speak only as of the date made, and the company undertakes no obligation to update these forward-looking statements.
*A valid license to MAAP5 from EPRI is required prior to a customer being able to use MAAP5 with Licensee’s simulator products. EPRI does not endorse any third-party products or services.
Orchid, ROSE and Visual Simex are trademarks of L3 MAPPS. All other brand names and product names referenced are trademarks, registered trademarks, or trade names of their respective holders.
- Sean Bradley
Sales & Operations Services
- +1 514-787-4953